Manufacturer Cisco Systems, Inc Manufacturer Part Number WS-C2960-24TC-S Manufacturer Website Address www.cisco.com Brand Name Cisco Product Line Catalyst Product Series 2960 Product Model 2960-24TC-S Product Name Catalyst 2960-24TC-S Managed Ethernet Switch Product Type Ethernet Switch Product UPC 882658169304 Interfaces/Ports: Number of Ports 24 Fast Ethernet Port Yes Interfaces/Ports 24 x RJ-45 10/100Base-TX LAN 2 x RJ-45 10/100/1000Base-T Uplink 1 x RJ-45 Console Management Media & Performance: Connectivity Media Category 3, 4, 5 UTP 10Base-T Category 5 UTP 100/1000Base-T Performance 16Gbps Switching Fabric 6.5Mpps Forwarding Rate For 64-byte Packet I/O Expansions: Number of Expansion Slots 2 Expansion Slots (2 Total) SFP (mini-GBIC) Network & Communication: Layer Support 2 Management & Protocols: Manageable Yes # Management CLI # Syslog # DHCP # SNMPv1, v2c, and v3 # Telnet # Web browser # Express Setup # Cisco Network Assistant # IEEE 802.1p QoS # IEEE 802.1Q VLAN # RMON (history, statistics, alarms, and events) # CiscoWorks LAN Management Solution # Cisco Identity-Based Networking Services Operating System # Cisco IOS Software # LAN Lite Image installed Memory: Standard Memory 64 MB Memory Technology DRAM Flash Memory 32 MB Software: Operating System # Cisco IOS Software # LAN Lite Image installed Power Description: Input Voltage 110 V AC 220 V AC Input Voltage Range 100 V AC to 240 V AC Power Source Power Supply Physical Characteristics: Dimensions 1.73" Height x 17.50" Width x 9.30" Depth Weight 8 lb Miscellaneous: Package Contents # Catalyst 2960-24TC-S Managed Ethernet Switch # Catalyst 2960 Switch Getting Started Guide # Regulatory Compliance and Safety Information for the Catalyst 2960 Switch # AC power cord # 1 x RJ-45-to-DB-9 adapter cable # Mounting kit that contains: * 4 x Rubber feet for mounting the switch on a table * 2 x 19-inch rack-mounting brackets (also used for wall mounting) * 6 x Phillips flat-head screws for attaching the brackets to the switch * 4 x Phillips machine screws for attaching the brackets to a rack * 1 x Cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets * 1 x Redundant power system (RPS) connector cover * 2 x Phillips pan-head screws (for attaching the RPS cover) * 4 x Phillips truss-head screws (for wall-mounting brackets) Warranty: Standard Warranty Lifetime Limited Share|